{"id":8457,"date":"2015-02-13T09:42:25","date_gmt":"2015-02-13T15:42:25","guid":{"rendered":"http:\/\/www.eagleeyenetworks.com\/?p=8457"},"modified":"2020-09-15T12:58:25","modified_gmt":"2020-09-15T17:58:25","slug":"adding-cameras-rtsp","status":"publish","type":"post","link":"https:\/\/www.een.com\/it\/blog\/adding-cameras-rtsp\/","title":{"rendered":"Adding Cameras Through RTSP"},"content":{"rendered":"

For best results, we recommend using cameras on our officially supported list. We also understand that this isn’t always possible. Some installations need to make use of existing equipment or may have specialty cameras. We have an advanced option that allows for adding cameras directly.<\/p>\n

We support RTSP<\/a> and can use a wide range of IP cameras that support two simultaneous streams. This is a widely supported standard and is the method underneath ONVIF.<\/p>\n

To add a camera through RTSP, we require a static IP for the camera and the RTSP URLs from the manufacturer. Although the RTSP protocol is standardized, the actual URLs for each device varies by manufacturer. Most brands with include them with the cameras documentation or have them available. It is rare for not to be list somewhere.<\/p>\n

In the Eagle Eye interface:
\nWhen logged-in as a administrator, enable RTSP cameras in Account Settings under Cameras.<\/p>\n

\"Screen<\/p>\n

\"Screen<\/p>\n

Your Dashboard will show a new orange plus symbol in the top right of the Available Cameras section. Click on the plus symbol to add a RTSP camera<\/p>\n

\"Screen<\/p>\n

You will need to provide a static IP address for the camera along with the path section of the RTSP URL for the camera.<\/p>\n

\"Screen<\/p>\n

For example:<\/p>\n